Main Menu
This page today ...
total: 0
unique: 0

This page ever ...
total: 64
unique: 47

Site ...
total: 2661
unique: 1181
  • Guests: 1
  • Members: 0
  • Newest Member: ole
  • Most ever online: 47
    Guests: 47, Members: 0 on Wednesday 21 February 2018 - 23:52:15
You must be logged in to post comments on this site - please either log in from the Login box or from here.If you are not registered click here to signup.

bullet Kim
1 year ago
You do not have access to view this page.
Username or Email:


[ ]
[ ]

»BASCOM-AVR : UART Bootloader for ATTINY841 / ATTINY1634 : REPLY
You do not really need a bootloader section to have a bootloader, if the avr has self programming modify the reset vector should d...
»BASCOM-AVR : Program does not start when uploaded via bootloader : REPLY
Thx for advice. I removed all commands in relation to the LEDs in the bootloader, recompiled and loaded into flash memory via ISP...
»BASCOM-AVR : Program does not start when uploaded via bootloader : REPLY
Long time ago i have problem with MCS Bootloader with M328P (simillar to smaller 168P) Problem was that MCS Bootloader uses two ...
»BASCOM-AVR : Program does not start when uploaded via bootloader : NEWTOPIC
Dear All, I loaded my application program via the MCS bootloader into ATMEGA168. Successfully But: My application program did ...
»BASCOM-AVR : SD Card Speed Clock : REPLY
With Xmega you dont need the level converter. Xmega 3.3V ... SDCard 3.3V To the Xmega I always link SDCard directly. ...
»BASCOM-AVR : MCS bootloader fuses : REPLY
Many thanks for the good advice. Programming using the bootloader went well. BR Chris
»BASCOM-AVR : SD Card Speed Clock : REPLY
[quote="Evert :-)"]Max default clock speed for a sd card is 48Mhz. If you power up an sd-card it will always work on 3.3V, 1 bit ...
»BASCOM-AVR : UART Bootloader for ATTINY841 / ATTINY1634 : REPLY
Never mind. Silly question. Attiny's don't have a bootloader section
»BASCOM-AVR : Atmel AVR as ISP/Bed of nails test system : REPLY
Hi All, Thats a very Interesting product. I'll go though the documentation and maybe purchase both and see which one fits be...
»BASCOM-AVR : Setting times on multiple DS 3231 RTC Modules : REPLY
HI, By using an I2C level conversion device with enable control (EN, OE pin) such as PCA9306, PCA9517, FXMA2102, devices with the...

Date published: not known

»wie programmiere ich einen ATMEGA 644-20AU mit den Programmer My AVR USB Light ?
Hallo, stehe jetzt völlig in der Luft. Habe eine Platine auf der ein AMEGA 644-20AU nagelneu und unbespielt ist. Habe als Progammer den USB Ligh...
»1Wire DS1820 und Werte speichern im EEProm Mega8
Hallo Leute, ich habe ein Problem mit meinem Prog! Ich möchte meine Klimaanlage im Auto steuern und die Temperatur mit dem 1Wire DS1820 messen. Da...
»Attiny44A ; PDIP vs SMD - Übertragung schlägt fehl
Hallo Leute! Habe mich eben erst angemeldet, da ich doch ein merkwürdiges Problem habe und hier im Forum und im Internet nichts hilfreiches dazu g...
»Der Zug der Zeit (eine Uhr)
Nachdem mein Versuch mit einer 'stehenden Laufschrift' einen, aus meiner Sicht, netten Effekt gezeigt hat, mach ich jetzt ein Projekt daraus. Hier ...
»Anfänger Webserver mit Wiznet 5200
Hallo Zusammen, nach Monaten des "Schlafes" habe ich mein modifiziertes Projekt "Probier-Webserver" wieder ausgegraben. Das ist eine abgewandelte ...
»Flashen über ISP und Bootloader
Mal eine Frage am Rande: gibt es Treiberprobeme wenn man auf einem Rechner Programme per ISP und Bootloader (je nach angeschlossener Hardware) über...

Date published: Tue, 22 May 2018 21:53:37 +0000

»93c46 editor programmer bascom & vb93c46 editor programmer bascom & vb
»93c46 Bascom & VB693c46 Bascom & VB6
»Analog clock on SSD1289 3.2" 240x320 lcdAnalog clock on SSD1289 3.2" 240x320 lcd
»Nextion HMI lcd with KaraDio the best webradio esp8266Nextion HMI lcd with KaraDio the best webradio esp8266
»Adding 240x320 lcd to the WifiWebRadioAdding 240x320 lcd to the WifiWebRadio
»IV-17 Nixie clock GPS set time & date at power onIV-17 Nixie clock GPS set time & date at power on

Date published: not known

»Bascom Can Bus Sniffer
»R.I.P Ben Zijlstra
Remembering Ben Zijlstra We hope that people who love Ben will remember and celebrate his life. more info at MCS
»KaRadio webradio ESP8266
The Dimitris board is available at  This is a hardware project for Ka-Radio
small tool to edit 93C46 eeprom written in BascomAVR & VB  Bascom control the 93C46 so we sent data via comport from VB code will be added later ...
»nRF24L01+ RC Controller
This is a RC controller TX & RX unit with nRF24L01+ nRF24L01+ / with PA and LNA for longer range facts: TX 1 x potmeter for servo ...
»RAW lcd
Connecting RAW lcd to atmega8 the lcd is 6 digit + time glass LCD Hour Meter for  tractor ,air compressor, ect the lcd have 4 com pins  & 14...

Date published: not known

Proudly powered by e107 which is released under the terms of the GNU GPL License.